FFConfigLite

Ford Focus 2 and C-Max I Module Diagnostics and Configuration

Connect your Ford Focus 2 or C-Max I to an ELM327 or ELS27 interface to access and manage various CAN-bus modules. Supported modules and functions include:

Engine Control Module (ECM): Retrieve module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset long-term fuel trim (KAM) for the following ECUs: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).

Instrument Cluster (IPC): Access module information, read and clear DTCs, configure the module, reboot it, change odometer units, and perform odometer correction (mileage adjustment).

Brake Control Module (BCM): Retrieve module information, read and clear DTCs, configure the module, reboot it, reset Dynamic Damper System (DDS) calibration, and perform brake bleeding.

Body Control Module (BCM): Access module information, read and clear DTCs, configure the module, and reboot it.

Airbag Control Module (ACM): Retrieve module information, read and clear DTCs, configure the module, reboot it, and clear crash data.

Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM.

Climate Control Module (CCM): Retrieve module information, read and clear DTCs.

Audio Control Module: Access module information, read and clear DTCs, and obtain the radio code (for M-series radios).

Note: Some features require the full version of the software.

ELM327 Modification: For full functionality and access to additional modules, consider modifying your ELM327 adapter. Instructions can be found here: http://forffclub.narod.ru/index/0-2

ELS27 Information: Purchase ELS27 at: https://els27.ru/. Set the baud rate to 38400 for ELS27USB and 2,000,000 for ELS27BT using the ELS27 Baudrate utility.